Tabco Optical

Push-On PVC poly vinyl chloride Semi-Soft "Tear drop” Shape 15mm in 25 pairs in bag. Please note overall length ranges from 14-15mm current stock is nearly 15mm. Mix-N-Match Nose pads...

Push-On PVC poly vinyl chloride Semi-Soft "Tear drop” Shape 17mm in 25 pairs in bag. Please note overall length ranges from 16mm to 17mm current stock is at 17mm. Mix-N-Match Nose pads...

Ultra-Thin Nose pad Clear PVC - Push-On Teardrop 12mm 10 pair $9.95 Thickness is about .050" / 1.25mm  Special Mix-N-Match Premium Nose pads pricing per bag $7.49 per bag on 4 to 15 bags,...

Standard Hex Nut Wrench (2.25mm) for Hex nuts that measure 2.25mm from side to side, referred to as ACF= A-Cross-the Flats. Fits standard optical screwdriver handles #TS207, TS230, TS231, TS233,...

2.5mm Hex wrench, fits Omni Nut (each) for use with the standard optical screw handle see #TS207, TS230, TS231 or TS233 This wrench is for hex nuts that measure 2.5mm across the flats.  This...

Gripping Pliers with two metal finger arms at 45 degree angle from handles grips, Blue cushion grips made of durable  stainless steel 

Solid Brass Body Screwdriver with three double ended blades TS204 slotted, TS206 slotted and TS208 Phillip's. & TS212 Hex Nut wrench 2.25mm. Top black cap can be removed to store unused blades...

Plastic and metal frames are held with this pliers while working to make adjustments with other pliers.  Nylon jaw is 10mm wide.  Round stainless steel jaw is 2mm at tip. Dark blue cushion...

Compression sleeve & Bushing cutter, polished stainless steel jaws, red or blue handle grips and total length of 5-1/2 inches

Pliers for removing blocking pads, typical diameter of 15.5mm / 0.610 (5/8").  Firmly grips lens blocks. Serrated jaws and 10-degree angle for easier manipulation.  Polished stainless steel...

De-Burring cone and Deluxe TS220 handle used to De-burr and break edge of drilled holes prior to and make installation of rimless lens compression sleeves easier.

Deluxe Screwdriver Handle Comes with One Doubled Ended Screwdriver Blade; Choose Between #TS202 (1.6mm .062"/ 2.0mm .078" Blade) or #TS204 (1.6mm .062"/ 1.8mm .072"...