Taps for threading
Taps for frame repairs and modifications. These hand taps are designed to primarily create an internal thread to accept a fastener's thread item like a "screw"
Please note drill bit for rimless frame lens drilling are located in separate section call Rimless Drill bits and milling bits.
-
Tap metric M1.0 sold 2 pieces #T1100
Tabco Optical
$16.95Tap metric M1.0 Material Hardened Steel sold in two piece vials. Drill for this tap Is .85mm to .90mm this tap is designed for limited use such as re tapping a hole. If you need an industrial and or production grade tap visit...$16.95 -
Tap metric M1.4 sold 2 pieces #T1130
Tabco Optical
$16.95Tap metric M1.4 Material Hardened High Speed Steel sold in two piece vials. Drill for this tap Is T1220 or T1230 this tap is designed for limited use such as re-tapping a hole. If you need an industrial and or...$16.95 -
Tap metric M1.8 sold 2 pieces #T1170
Tabco Optical
$16.95Tap metric M1.8 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1260 this tap is designed for limited use such as retapping a hole$16.95 -
Tap metric M1.7 sold 2 pieces #T1160
Tabco Optical
$16.95Tap metric M1.7 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1250 or T1260 this tap is designed for limited use such as re-tapping a hole$16.95 -
Tap metric M1.6 sold 2 pieces #T1150
Tabco Optical
$16.95Tap metric M1.6 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1250 or T1240 this tap is designed for limited use such as re-tapping a hole. If you need an industrial and or production grade tap visit...$16.95 -
Tap metric M1.2 sold 2 pieces #T1110
Tabco Optical
$16.95Tap metric M1.2 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1200 1.05mm this tap is designed for limited use such as re-tapping a hole. If you need an industrial and or production grade...$16.95 -
Tap metric M1.3 sold 2 pieces #T1120
Tabco Optical
$16.95Tap metric M1.3 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1210 this tap is designed for limited use such as re-tapping a hole$16.95 -
Tap metric M1.5 sold 2 pieces #T1140
Tabco Optical
$16.95Tap metric M1.5 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1240 this tap is designed for limited use such as retapping a hole$16.95 -
Tap 0-90 .058-90 2 pieces #T1040
Tabco Optical
$16.95Tap 0--90 .058-90 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1240 or T1250 this tap is designed for limited use such as re-tapping a hole$16.95 -
Tap 0-64 .058-64 2 pieces #T1030
Tabco Optical
$16.95Tap 0--64 .058-64 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1240 or T1250 this tap is designed for limited use such as retapping a hole$16.95 -
Tap 00-90 .048-90 2 pieces #T1000
Tabco Optical
$16.95Tap 00-90 .048-90 Material Hardened Steel sold in two piece vials. Drill for this tap Is T1240 or T1230 this tap is designed for limited use such as re-tapping a hole$16.95